Layered by hand, so a skilled technician can build internal characterisation that a milled block cannot reproduce. This page covers the porcelain crowns appointment itself — what is prepared beforehand, what happens in the chair, and what the first hours afterwards feel like. Plan for 2 appointments and 5-7 days.
Preparation and scanning take around 45-60 minutes per tooth, and the fit visit a further 30 minutes; a multi-unit case is grouped into one longer prep appointment rather than spread out. Preparation is done under local anaesthetic only, and if the tooth has already had a root canal many patients ask for it without anaesthetic at all. No sedation is normally needed. Layered by hand, so a skilled technician can build internal characterisation that a milled block cannot reproduce.
Your scan or photographs are reviewed in person against the remote plan. Layered by hand, so a skilled technician can build internal characterisation that a milled block cannot reproduce.
Between 0.5 mm and 2 mm of enamel is removed depending on the material; the margin is placed just at or slightly below the gum line so the join is invisible.
An intraoral scan captures the preparation and the opposing bite. Chairside milled or laboratory temporaries are cemented while the definitive units are made.
The units are checked for margin fit, contact points and shade under different light, then bonded or cemented and the bite adjusted with articulating paper until it reads evenly.
A classic, natural-looking option layered over a strong core material.
You leave with written aftercare and the follow-up schedule fixed — for this option that means 5-7 days, with 2 appointments in total.
Preparation is done under local anaesthetic only, and if the tooth has already had a root canal many patients ask for it without anaesthetic at all. No sedation is normally needed.
Preparation and scanning take around 45-60 minutes per tooth, and the fit visit a further 30 minutes; a multi-unit case is grouped into one longer prep appointment rather than spread out.
A restorative dentist or prosthodontist prepares and fits the units, with a dental technician doing the shade work — ask whether the technician sees you in person for the shade, which is what separates a good match from an average one.
Your prepared teeth are covered by temporaries that are deliberately soft-cemented, so they can feel slightly rough or loose. Sensitivity to cold for a few days is normal while the dentine is protected only by the temporary.
Cost and alternatives for Porcelain Crowns.
Compare vs alternatives → See full cost breakdown →Porcelain is layered and characterised by hand for appearance; zirconia is milled for strength. The best result depends on which tooth you are restoring.
Glazed porcelain resists staining better than natural enamel, but the margin can discolour if hygiene slips.
Ask for the reduction in millimetres for your material. Zirconia and metal-ceramic need more clearance than a bonded all-ceramic unit, and that reduction is permanent.
Slightly subgingival for front teeth so the join is hidden, at gum level elsewhere. A margin buried too deep is the usual cause of chronic gum inflammation around a crown.
Yes — insist on a mirror check for shade and shape at try-in. Once the unit is definitively cemented, changes mean remaking it.
2 appointments — and 5-7 days. Any quote that compresses that materially is worth a second read, because laboratory and healing time set the schedule, not the clinic diary.
Zirconia trades hand-layered nuance for strength; E-max sits between the two.
Hand-layering remains the benchmark for appearance.
All-ceramic removes the alloy question entirely.
Modern all-ceramic work is contoured far more thinly.
Layered by hand, so a skilled technician can build internal characterisation that a milled block cannot reproduce.
| Sessions | 2 appointments |
|---|---|
| Time in Turkey | 5-7 days |
| Recovery | Minor sensitivity |
| Expected lifespan | 10-15 years |
Zirconia trades hand-layered nuance for strength; E-max sits between the two.
Timeline, aftercare and what to watch for, day by day.
Layered by hand, so a skilled technician can build internal characterisation that a milled block cannot reproduce. Preparation and scanning take around 45-60 minutes per tooth, and the fit visit a further 30 minutes; a multi-unit case is grouped into one longer prep appointment rather than spread out.
Layered by hand, so a skilled technician can build internal characterisation that a milled block cannot reproduce. Preparation is done under local anaesthetic only, and if the tooth has already had a root canal many patients ask for it without anaesthetic at all. No sedation is normally needed. Preparation and scanning take around 45-60 minutes per tooth, and the fit visit a further 30 minutes; a multi-unit case is grouped into one longer prep appointment rather than spread out.
A restorative dentist or prosthodontist prepares and fits the units, with a dental technician doing the shade work — ask whether the technician sees you in person for the shade, which is what separates a good match from an average one. Your prepared teeth are covered by temporaries that are deliberately soft-cemented, so they can feel slightly rough or loose. Sensitivity to cold for a few days is normal while the dentine is protected only by the temporary.
2 appointments and 5-7 days are what the plan is built around. Zirconia trades hand-layered nuance for strength; E-max sits between the two.